SHEETROCK® BRAND EASY SAND™ Joint Compound
Sheetrock® Brand Easy Sand™ 20 Joint Compound provides low shrinkage and superior bond, which makes it excellent for laminating gypsum panels to gypsum panels, sound-deadening boards and above-grade concrete surfaces. It resists humidity and can be applied in damp weather allowing for same-day joint finishing and faster job completion.
As low as $14.99
each
- For interior gypsum panels and exterior gypsum ceiling boards
- Weighs 25% less than conventional setting-type compounds
- Sanding ease similar to a ready-mixed, all-purpose joint compound
- Unique humidity resistance
- Exceptional bond with low shrinkage
- Check-crack resistance in heavy fills
- 20 minute working time
- 25-35 minute setting time
| Series/Sub-Brand | SHEETROCK® BRAND EASY SAND™ |
|---|---|
| Type | Joint Compound |
| Size | 18 lb. |
| Style | 20 min. |
| Brand | USG |
In cold weather during gypsum panel joint finishing, minimum surface, water, mix and air
temperature of 45°F must be ensured until joints are completely dry. Adequate ventilation shall
be provided to carry off excess moisture. Mix what can be used within the working time. Use a
clean container for each batch. Add 1 bag into approx. 5-6 qt. clean water. Mix 1 minute or until
smooth, scrape container sides. Add water if needed and remix approx. 1 minute or to preferred
consistency. Do not re-temper or mix with any other material.
Write Your Own Review