SEAL-KRETE® High Performance Floor Coatings, Epoxy-Shell™ 1000 EPL Part A Only, Armor Gray, 2 Gallon
Seal-Krete® Epoxy-Shell™ 1000 EPL is a two component, 100% solids Cyclo-Aliphatic hybrid coating that has excellent adhesion properties to concrete and other substrates. Due to its unique chemistry, this coating exhibits great flexibility, extended working times, and self-leveling properties. Low odor makes this great choice for interior applications. Note: Must mix with Part B to use product.
NOTE: Packaging might be different than provided product image. Product picture does not depict size, check stated sizing for correct quantity.
- Part A only, must mix with Part B sold separately (Click Here for Part B)
- Emits virtually no odors and can be applied indoors
- Low VOC
- 60 minute pot life
- Convenient 2 parts A with 1 part B mixing ratio
- Serves as both a primer and basecoat in 1 coat
- 100% solids formulation
- Exhibits great self-leveling properties with a built in shine
| Series/Sub-Brand | High Performance |
|---|---|
| Color | Armor Gray |
| Type | Interior |
| Size | 2 Gallon |
| Brand | Seal Krete |
| Color Family | Gray |
| Finish | Gloss |
| Material | 100% Solids Epoxy |
| Manufacturer Code | 337008 |
Resin Type: Amine Cured Epoxy
Coverage: 100 Sq. Ft. per gallon
Dry Times: Recoat in 12-48 hours, Light Traffic 12-16 hours, Vehicle Traffice 36-48 hours, Full Cure 7 days
Pot Life: 60 minutes at 70 degrees Fahrenheit
Mixing Ratio: 2:1 (Part A to Part B, by volume), Must mix Part A & Part B together for 60-90 seconds with a low speed drill and spiral mixing wand. Must pre-mix prior to use. DO NOT hand mix.
Clean Up: Clean tools and application equipment immediately after use with an active solvent like xylene.