Milesi 2K Water-Borne, Slow Retarder, 1 Liter
Milesi Reducers give the best performance in the coating to compensate for all geographic areas. Milesi Reducers are meant to be used to adjust viscosity, compensate for atmospheric conditions, and adjust dry times. The percentage of reduction is based on per project needs, consult corresponding products technical data sheet for best mixing ratios.
LTC31 is a water-borne retarder additive. Used in stain/impregnator applications to dramatically increase open time to avoid overlapping marks in brush application. This retarder can be used in Milesi water-borne coatings, including primers, topcoats, and stains, to adjust drying time and improve application properties. It is recommended to drill mix this into clear & pigmented water-borne coatings.
- Interior Use
- Slows the dry time
- Reducer/ Retarder only
- Water-Borne additive
| Type | 2K Retarder |
|---|---|
| Size | 1 Liter |
| Brand | Milesi |
| Material | Water-Borne |
| Manufacturer Code | LTC31-1 |
Add appropriate amount per technical data sheet shown on the Topcoat/Sealer/Primer by weight or volume.
Application: Used in pigmented & clear topcoats at a ratio of 2% for additional open time and flow.
Clean-Up:
Water-Borne: Water, Denatured Alcohol
Solvent-Borne: Acetone Clean up equipment immediately after use with appropriate cleaner.
DO NOT USE LACQUER THINNER TO REDUCE OR CLEANUP 2K URETHANES!!
Related Products
-
Milesi 2K Interior Water-Based Topcoat "Natural Effect", Clear, 5 Sheen, 5 KG SKU: HGA195$169.99each -
-
-
-
-
