Chat with us, powered by LiveChat

Benjamin Moore High Performance, Universal Metal Primer Oil-Based Low VOC, Gray, Gallon

In stock
SKU
CP132070
 
 

Benjamin Moore High Performance, HP1320 Universal Metal Primer is a high-performance, one-component, quick-dry, rust-inhibitive metal primer, formulated for use on ferrous metal substrates. The phenolic alkyd resin formulation allows for a wide variety of intermediate and finish coats. The quick dry and recoat times allow for fast turnaround of production work. Additionally, this product may be used as a tie coat over existing coatings that will be finished with a high performance coating. Not recommended for non-ferrous metals such as galvanized, aluminum or for use in immersion service. May be applied to new or properly prepared rusted surfaces.

Recommended for: Ferrous Metal such as Steel & Iron. Universal Metal Primer is a high performance coating specifically designed for application directly to ferrous metal substrates. It provides corrosion resistance for both interior and exterior steel surface in mildly corrosive conditions.

$57.69
each
Select a store
Not available for pickup
Delivery
Not Available
  • Fast 30-minute dry
  • Low VOC formula
  • Use over many existing coatings
  • Corrosion protection on all ferrous metals
  • Accepts most topcoats
More Information
Series/Sub-BrandHigh Performance
ColorGray
TypeInterior/Exterior
SizeGallon
BrandBenjamin Moore
Color FamilyGray
MaterialOil-Based
Manufacturer CodeHP1320

Surface Preparation: All grease, oil, dirt, mildew, or any other surface contaminants must be removed using HP6000 Oil & Grease Emulsifier or SSPC-SP1 solvent cleaning. 

Ferrous Metal: All loose rust and mill scale should be removed prior to applying this product. A minimum of Commercial Blast or abrasive blasting is recommended for severe environmental exposures. Small areas may be cleaned in accordance with Hand Tool Cleaning or Power
Tool Cleaning or SSPCSP13 Power Tool Cleaning to bare metal. Tightly adhering rust may be coated over provided the surface is intended for use in mild atmospheric exposures.
Previously Painted Surfaces: Clean using HP6000 Oil & Grease Emulsifier or solvent washed as outlined above. Dull glossy surfaces by sanding. Remove all loose, flaking or peeling paint prior to application.

Coverage: 350-450 Sq. Ft., Wet film thickness 3.6 - 4.6 mils depending on surface texture and porosity. 

Dry Time: To Touch in 30 minutes, To Recoat in 4 hours, at 77°F and 50% relative humidity. 

Clean-Up:  All equipment and painting tools with HP7030 or Xylene after use. 

Write Your Own Review
You're reviewing:Benjamin Moore High Performance, Universal Metal Primer Oil-Based Low VOC, Gray, Gallon
Your Rating