3M Accuspray ONE Spray Gun System with PPS Series 2.0 Spray Cup System Kit
3M™ Accuspray™ ONE Spray Gun System with Standard PPS™ Series 2.0 combines the simplicity and easy maintenance of 3M’s Accuspray™ spray gun with the material-saving, rapid clean-up convenience of PPS™ Series 2.0. Replaceable atomizing heads afford the performance of a new gun, on demand and at a fraction of the cost.
$358.39
each
- Features Accuspray™ ONE Spray Gun – ONE gun meets all of your spraying needs
- Includes five (5) replaceable atomizing heads in 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue) for spraying of primer, sealer, base and clear coat
- Fast, simple head replacement affords the performance of a brand new spray gun on demand
- Atomizing heads can be used on any Accuspray™ replaceable atomizing head spray gun
- Kit includes one (1) Standard size (22 oz) PPS™ Series 2.0 Hard Cup
- Includes five (5) Standard size (22 oz) PPS™ Series 2.0 Lids and Liners
| Series/Sub-Brand | PPS Series 2.0 |
|---|---|
| Type | Spray Gun Kit |
| Style | HVLP |
| Brand | 3M |
| Material | Mixed |
| Manufacturer Code | 26580 |
- The 3m™ Accuspray™ ONE Spray gun is for use with compressed air systems only
- Air Inlet - 1/4” NPS (m)
- Maximum air inlet pressure is 24 psi (Maximum inlet pressure will yield approximately 10 psi (0.69 bar) at the air cap)
- Required atomizing air volume is 13 cfm
- Weight – 11.2 oz
- 5 to 8 spray outs before the head needs replacement
- For best atomization results use 13 cfm @ 20 psi
Write Your Own Review