Sirca 1K Interior Water-Borne Self-Sealer, Clear, 0 Sheen, 5 KG
Sirca's Interior Water-Borne Clear Self-Seal natural effect, 6SO-WOOD, is a water-borne self-seal product that gives the appearance of a natural unfinished surface. This coating allows for great pore definition, levelness, and smoothness.
When coating oak or chestnut it may be necessary to apply a solvent-borne insulating agent first due to the tannins present in the wood. This gives the wood a look of being unfinished, but it has protection with no grain rasing. Applying this insulating agent may increase the overall sheen of your project. 6SO-WOOD does not change the overall color of the substrate. Do not apply at temperatures below 59°F. Do not apply when relative humidity is more than 85% without moving air.
- Color: Clear
- Self-sealer
- Interior
- Natural effect on wood
- Water-Borne
- Interior furniture and accessories in general
- Fast-drying
- Spray application
- Does not block tannins
| Series/Sub-Brand | Gemini |
|---|---|
| Color | Clear |
| Type | 1K Self-Sealer |
| Size | 5 KG |
| Brand | Sirca |
| Color Family | Clear |
| Paint Sheen | 0 Sheen |
| Material | Water-Borne |
| Manufacturer Code | 6SO-WOOD05 |
Application Method: Traditional Spray Gun, Airless, Airmix, recommended 1-3 coats (sanding between coats).
Mixing Ratio: 100 parts by weight of 6SOWOOD with, 6CW1S02- 5 parts by weight, with added water: 0-10 parts by weight (depending on the application needs), or 100 parts by volume of 6SOWOOD, with 6CW1S02 4-5 parts by volume, with water: 0-10 parts by volume(depending on the application needs).
Coverage: 157 Sq. Ft. per gallon or 3.9 sqm/l (1 mil dried).
Application Amounts: 100-200 g/mq 3 – 5 (wet mils) Number of coats: 1 -3 coats with sanding in-between coats
Dry Time: Dust Free in 30-40 minutes, To Touch: 30-40 minutes, Dry to sand & recoat: 4 hours, Stackable in 8-12 hours.
Clean Up: Clean up equipment immediately after use with warm soapy water.