SEAL-KRETE® High Performance Floor Coatings, Poly-Shell Color Pack #924 Sand, Quart
*NOTE: On-screen and printed color representations may vary from actual color once applied. Recommended to do a test on a sample surface before applying to the whole area.
Seal-Krete® Poly-Shell™ Color Packs can be added to Poly-Shell 7000, after Part A and Part B are mixed together.
To Tint: Add 16 ounces (1/2 can) of Poly-Shell color pack to an activated 2 gallon kit Poly-Shell 7000 (Parts A and B) and stir for 3 minutes with a drill mixer on a low speed. Carefully monitor the amount of colorant added to each gallon to ensure color is uniform or use a measuring container to ensure amounts. On large projects, make sure all colorant is from the same lot # or intermix all colorants before mixing into kit. Tint is to be added in the field at the time of application.
Poly-Shell Color system consists of two coats of Poly-Shell tinted with a clear top-coat applied after allotted drying time. Tinted Poly-Shell is the most economical solution for a chemical and abrasion resistant flooring system and provides unmatched performance when rapid return-to-service is required.
NOTE: Product picture does not depict size, check stated sizing for correct quantity.
- Color Pack for Poly-Shell 7000
- Color: #924 Sand
- Size: Quart
- Must be drill mixed with Poly-Shell 7000
- Poly-Shell 7000 sold separately
| Series/Sub-Brand | High Performance |
|---|---|
| Color | Sand |
| Type | Interior |
| Size | Quart |
| Brand | Seal Krete |
| Color Family | Tan |
| Material | Color Pack |
| Manufacturer Code | 981010 |
- Must be mixed with Poly-Shell 7000 activated kit
- See Poly-Shell application instructions