JELD-WEN 36 in. x 80 in. 6 Panel Colonist Steel Door, Left-Handed Unit, 4-1/2 -5-1/2 Adjustable Jambs, 90-Minute Fire Rating
JELD-WEN Premium Steel doors offer that relied-upon strength, durability and ease of maintenance that complement your home's style. Their high definition panels create an upscale look that adds architectural interest for increased curb appeal. Our strong and secure steel doors are built to prevent water absorption and resist rust to enhance your home for many years.
Adjustable Steel Jambs, with Aluminum sill with 3-1/2 in. Horns. 2 Spring hinges, 2-3/8 in. Single Bore.
As low as $594.71
- Cove & Bead Sticking
- Adjustable Steel Jambs 4-1/2 in. - 5-1/2 in.
- Aluminum Mill Sill with 3 in. horns
- Door withstands heat and prevents fire spreading to other spaces
- 2 Spring Hinges, 1 Ball Bearing Hinge
| Type | Fire Door |
|---|---|
| Rating | 90-Minute Fire Rating Steel |
| Brand | Jeld-Wen |
| Material | Steel |
| Door Type | 6-Panel |
| Door Configuration | Single Pre-Hung |
| Door Style | Colonial|Traditional |
| Door Core | Polystyrene |
| Door Size | 36 in. x 80 in. (3/0 x 6/8) |
| Rough Opening | 38-1/2 in .x 82-1/2 in. |
| Door Swing | Left Hand |
| Door Thickness | 1-3/4 in. |
| Jamb Type | C53 Steel Frame (4-1/2 - 5-1/2) |
| Hinge Finish | Satin Nickel (US15) |
Storage & Handling
- Always handle doors with clean hands or while wearing clean gloves
- Doors should not be at a job site until concrete floors, foundations and plaster walls are thoroughly dry.
- Doors should not be exposed to excessive moisture, head, dryness or direct sunlight
Installation
- Doors should be conditioned to average prevailing relative humidity of the locality before fitting
- Do not cut doors down. Cutting doors or jambs will negate the Fire Rating
- Please review local building codes for Fire Rating Required
- Allow 1/8 in. clearance between doro and frame at the top and sides of the unit.
- Be sure that jambs and stops are set perfectly square and plumb, shim and fasten every 2 feet.
Fiberglassing
- Fiberglass must be applied to the door immediately after fitting and hanging, but not during or immediately after high-moisture periods.
- Surfaces must beclean and dry
- Sand entire door lightly with 180 grit sandpaper
- Fiberglass all (6) sides, this induldes edges, tops and bottoms.
Write Your Own Review