General Finishes®, Water-Based ENDURO® RTM Stain, Raw Sienna, Quart
General Finishes® ENDURO® RTM (Ready To Match) Stain is a water‐based stain using a combination of dyes and pigments that closely mimic the look of oil‐based stains. The system consists of 12 ready-to-use LOW VOC Water-Based stains plus a clear base. This system is designed for professionals to be able to efficiently stain match in‐house. Intermix the stains and base to design your own colors. Brush or spray application.
As low as $30.49
each
- Water-Based Stain
- Interior Only
- Ready To Match
- Match stain on jobsite
- Brush or Spray Application
| Series/Sub-Brand | ENDURO® |
|---|---|
| Color | Raw Sienna |
| Type | Interior Stain |
| Size | Quart |
| Brand | General Finishes |
| Color Family | Red |
| Material | Water-Based |
| Manufacturer Code | QRS |
Application Conditions: Recommended 70°F and 50% humidity, out of direct sunlight. Variations in conditions and application technique can significantly affect dry times and coverage. Use GF Extender in warm or dry conditions.
Surface Prep: Always ensure the surface is clean of contaminants and dust. Variations in wood species, prep procedures, and application procedures can significantly affect color. Always test for color before staining your project.
Raw Wood: Sand with no finer than 220 grit sandpaper on closed-grain woods, 180 grit on open-grained woods.
Pre‐finished Wood & Other Substrates: Not recommended.
System Recommendations: Finish with 3 coats of any GF topcoat.
Write Your Own Review