Gemini Vinyl Lacquer Interior Primer/Undercoater, White, 5 Gallon
Gemini's PVS-1100 is a vinyl lacquer primer designed to be used in conjunction with Gemini’s white nitrocellulose lacquer topcoats. This primer has been developed using resins which improve the overall durability and moisture resistance of a standard nitrocellulose lacquer system. It dries fast and has excellent sanding properties. For wood substrates only. For interior use only.
- Color: White
- Vinyl Lacquer
- Primer/Undercoater
- Interior Use Only
- Fast-drying
- Excellent sanding properties
- Wood Substrates Only
| Series/Sub-Brand | Gemini |
|---|---|
| Color | White |
| Type | 1K Primer |
| Size | 5 Gallon |
| Brand | Gemini |
| Color Family | White |
| Material | Solvent-Brone |
| Manufacturer Code | PVS-1100-5 |
Application Method: Using conventional, HVLP, airless, or air assisted equipment, apply this product at 3-4 wet mils per coat. Let dry a minimum 20-25 minutes. Sand with 280-320 grit, no-fill sandpaper and remove sanding dust with clean compressed air, or tack cloth. This product must be sanded in between coats to ensure proper adhesion. Typically we recommend a coating system comprised of one coat of PVS-1100 applied at 3- 4 mils wet film build and 1-2 coats of an approved Gemini topcoat (see approved companion products section). On MDF we recommend two coats of primer (especially on routed areas). Refer to the Product Data Sheet for the topcoat you are using for maximum dry film thickness recommendations.
Mixing: Mix material thoroughly before and during use. Material may be mixed by hand or mechanical agitation at moderate speed.
Coverage: 375 Sq. Ft. per gallon at one mil dry film thickness.
Dry Time: Air Dry-at 78°, relative humidity 50%, To touch- 5-6 minutes, To Handle- 8-10 minutes, To sand & recoat- 20-25 minutes. Relative humidity will affect the speed of drying. Ideal conditions are 75° or warmer at 50% humidity or less. Dry time will be faster at higher temperatures and lower humidities, and equally slower at colder temperatures and higher humidities.
Clean Up: Clean equipment up immediately after use with lacquer thinner. Recommended to use SOL-9011, Non HAPs Thinner to clean up all equipment. Dispose of in accordance with Federal, State, and Local regulation regarding pollution.