3M PPS Series 2.0, Lids and Liners, Mini Size, Spray Cup System Kit, 6 fl. oz.
3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. The 28 fl. oz.(850 mL) disposable liner & lid kits are designed for use with the 3M Paint Preparation System (PPS) Series 2.0.
All kits contain disposable domed lids with integrated collars and full diameter micron filters, liners, sealing plugs and a reusable hard cup. These kits allow the end user to stock PPS lids & liners efficiently and cost-effectively. The liner & lid kits are available for 3M PPS™ Series 2.0 cups in five sizes ranging from 3 fl. oz. – 28 fl. oz. (90 ml – 850 mL) depending on use with either the standard cup or the H/O Pressure Feed Cups.
- 50 - Diposable liners
- 50 - Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar)
- 32 - Sealing plugs
- 1 - Reusable hard cup (26115) – gravity, non-pressure
- 200 ml (6.8 oz.) size - mini
- 200 micron full diameter lid filter (pre-welded filter)
- For use with the standard 6.8 fl. oz. (200 mL) gravity cup (26115) as well as the midi 13.5 fl. oz. (400 mL) H/O pressure feed cup (26121)
| Series/Sub-Brand | PPS Series 2.0 |
|---|---|
| Type | Spray Cup Kit |
| Size | 6 fl. oz. |
| Style | HVLP |
| Brand | 3M |
| Material | Mixed |
| Manufacturer Code | 26114 |
Key Benefits of Using the 3M™ PPS™ Series 2.0 Paint Preparation System:
- Only one PPS™ Series 2.0 cup for mixing and spraying
- Enables painters to mix less paint
- Use corresponding lids and liners for size of application
- Up to 70% savings of cleaning solvent
- Closed system - no outside contamination
- Faster system - from mixing to disposal
- Less operator exposure to solvents and reduction in VOCs
- Spray gun functions at any angle
- Available in multiple size cups
- Use the 3M™ PPS™ Series 2.0 Shaker Core to remove the lid easily
- When removing the lid and liner from the hard cup, twist lid to unlock, place fingers through hole in bottom of cup and push liner upwards, releasing lid and liner together.
- Use the wide base on your 3M™ PPS™ Series 2.0 Cup Sealing Plugs to stand your cups upside down when not in use, helping to keep the filter mesh wet.
- Eliminate traditional mixing cups and filters by mixing materials right inside your 3M™ PPS™ Series 2.0 Cups. Each lid contains a clean, welded-in filter.
- Stock all 5 Kit sizes to always have the right size cup for the job, reducing your cost per use.
- Maintain Compliance with EPA 6H Rule by using the 3oz/90mL size 3M™ PPS™ Series 2.0 Cups.
- Keep your red 3M™ PPS™ Dispensers. They still work with all 3M™ PPS™ Series 2.0 Lids and Liners.